Used Straightline 36" x 70' Stackable Transfer Conveyor, Unit #765

SN: #36700915480

Two are designed to ride piggy back on the top of third conveyor for over road transport                                                                                                                                                                                                                                     Frame on piggy back conveyors: 4 x 4 x 5/16” Chords with 2 x 2 x 1/4” Lattice members – with 3 x 3 x 3/16” angle recessed in frame for troughing idlers Frame on transport conveyor 4 x 4 x 5/16” Chords with 2 x 2 x 1/4” Lattice members – with 3 x 3 x 3/16 angle recessed in frame for troughing idlers Truss: 30” Deep Adjustable height under carriage – manual pin adjustment Note: Top conveyor to raise to 16ft Axle: Single – 8 bolt hubs - single 11.00-22.5 tires (on two piggy back conveyors) Axle: Tandem with duals – 10 bolt hubs – dual 11.00-22.5R tires (on transport conveyor) Air brakes and light package on transport conveyor Head pulley: 16” x 38” C.F. – 3/8” H.B. lagging – 3 7/16” shaft Tail pulley: 14” x 38” Wing style – 2-15/16” shaft Troughing idlers: CEMA C – 5” rollers on 4’ centers Return idlers: CEMA C – 5” rollers on 10’ centers Gear Reducer: Dodge size 5 with backstop Motor: 20HP 1800 230/460/3ph Toshiba Electrical switch gear / Inter locking Electrical cord hooks on one side Bearings: Dodge 2 bolt pillow block 3 7/16” on head pulleys and 2 15/16” on tail pulleys Take-ups: Dodge wide slot Conveyor belt: 36”- 3 ply 3/1 cover 350FPM / 750TPH Belt scraper: By Superior 5’ receiving hopper with extra idlers at load point Hitch: Fifth wheel and tow eye (on transport conveyor – tow eye on piggy back conveyors) Guarding: Tail pulley and V-belts Sandblasted: Frame (1) Coat urethane primer (1) Coat finished urethane