Superior 36"x500' Zipline Conveyor, Unit #872

SN: #1205639

Conveyor Frame

• Head section-40' long, skid mounted, idlers are on 4' spacing, head shaft is approximately 8' above grade; broken down for shipping
• Tail section-skid mounted, fully assembled with tail pulley, 5' gathering trough, and idlers
• Intermediates-4" structural channel, 10' long, supported on 2' high "H" supports

Drive specifications

• Drive-Class I head end
• Gear reducer-Dodge shaft mount
• Backstop-not included
• Motor-75 HP 1800 RPM TEFC
• V-belt drive-with drive guard
• Maximum Capacity-1000 STPH of 100 PCF material; belt speed 400 FPM; maximum 42' lift at 400' long; 10' lift at 1000' long (90% fines, 10% spherical lumps 7" minus)

Superior pulleys

• Drive pulley-24" dia. crown face drum with 3/8 in. herringbone lagging
• Tail pulley-18" dia. Chevron® wing
• Snub pulley-18" dia. flat face drum with 1/4 in. smooth lagging
• Bend pulleys-18" dia. flat face drum with 1/4 in. smooth lagging
• Weight pulley-18" dia. crown face drum with 1/4 in. smooth lagging
• Shafts-Turned and polished
• Bearings-Dodge
• Gravity take-up-take-up weight by owner
• Screw take-ups-capacity up to 6' long

Conveyor Components

• Belting -Not included
• Belt splice -not included
• Primary scraper-Exterra® Primary Belt Cleaner
• Superior Idlers-CEMA C, 5” dia. rolls, sealed for life ball bearings
• Load area-20° trough, 18" spacing
• Trough-35° on 4' spacing
• Returns-steel rolls, on 10' spacing
• Self-align trough-approximately 100' spacing
• Self-align return-Navigator® return idler spaced approximately 100' apart
• Radial hopper-5' long, sloped sides
• Gathering trough -5' long with adjustable rubber flashing

Additional Specifications

• Guarding-for drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected.
• Voltage-480 v / 3 ph / 60 hz
• Electrical-Not included
• Return guards-PVC guard
• E-stop-switch with pull cable on one side
• Discharge hood-not included
• Conveyor covers-not included
• Head & Tail Paint-1 coat primer, 1 coat finish enamel Superior Beige
• Intermediates-Galvanized
• Idler Paint-powder coated Superior Orange
• Owner’s Manual-(1) copy in English included for operation and maintenance